Відео

This was so helpful! I would have never attempted this without this video. Do you have a pattern or some other way I can say thanks?

Egypt could do this in its desert next to the Mediterranean...

Sorry but if you have a jumping baby at 7 months any remedy?

Thank you! thank you! Thank you!!

So the required space for this unit has an impact on the environment? C'mon, man.

Actually, it's "Salt Water Solar Desalination - SOLAR Energy"

15 watts not amps....

thank you very much! it did the job for my "SPF 5000 ES" as well!

Not true about not getting to see the slab with Home Depot. HD uses local businesses to source slabs and customers are encouraged to go to the fabricator to view and select the slabs for their projects. The fabricator will tag the slab for you.

You will NEVER get 10 L of pure water a day 😂from something that small. 😂 There’s no way.😂 QUIT LYING

Here's an idea stop making the video unless you know what you're doing and watch a UA-cam video about how to work on Tundra brakes. Even all your viewers know it's in the back. I mean good on you for doing your own stuff and trying to help people but you're actually only wasting people's time. Best of luck to you brother.

When I try to jump the main flame as you've done the pilot goes out, similar to how a breaker would flip.

Great video, thank you.

Why do I hear a child in the background....not a safe place for children

Used in Israel!! where is that?

10 liters for one person per day? That would result in a water toxification 😂

I will try it .

We recently remodeled a kitchen with granite from MSI in Sacramento. Got a good deal on a couple gorgeous slabs

Thanks, man! this was problem on my fireplace. The wires were corroded / loose at the switch). Scuffing the wires with sandpaper and tightening them up fixed it up nicely. Appreciate the help!

Must be 25 or 30 years ago when a big truck magazine had an 18 wheeler modified with engine, and aero mods to get 14 mpg US gallons with 80, 000 lb load. Gotta be axway to do better with an RV.

Thank you… you should make a video about making the older units like this one to operate during a power outage, with the jumper. All the videos on UA-cam only show how to install batteries to the newer models to get them working during a power outage. Nothing on older pilot light style gas fireplaces. Our power will be out for 10 hours and the temperature is -6F. That jumper that you showed, opened the valve and allowed my main gas valve to open. Nobody is showing folks how to open the main valve when the switch on the wall is dead. This video helped provide heat to my home, and may have saved my water pipes. Fingers crossed. Big thank you…..

I think I'm going to have to replace the gas valve on mine. I have struggled to keep my freestanding gas fireplace running for the last 18 years (very similar to yours, except mine is freestanding, so easier to work on). I have kept it limping along by cleaning it every year, fiddling with it, hoping and getting lucky. Last year I replaced the entire thermocouple/thermopile assembly unit, and it worked all winter. Note: I did get my thermocouple/thermopile assembly unit from Amazon, so that could be the issue. I also replaced the switch which seemed to help one year. This winter, when we had our first cold snap (-34C outside right now), I cleaned it all out, but have not gotten it running after three days of working on it. I can get the pilot to light, but as soon as I release the push and hold pilot nob, the pilot goes out. I have also changed out my propane regulator (I own four of them), but nothing is working. I also put my MAPP gas torch on the thermopile/couple to see if one or both was weak. I'm wondering now if the valve has always been faulty (buggy) without completely failing. I love the stove when it's working, as it puts out a massive amount of heat, and has a top that I can cook on in a pinch. But it is a royal pain to keep running. The valve unit is $140 (US), but a new stove is $2,500. I wish there was a way to check the valve unit before I replace it, but I haven't found anyone online who demonstrates how to test the valve unit.

This guy has no idea what he is doing the pilot needs to be cleaned

I barley drink half a litre of water a day so this is a lot of water

🙂just the information i needed...thank you!

I've cleaned the lint out of the top, and out of the back. I've replaced the water pump. It still leaves the clothes hot and damp. What else is there to clean out? The hose, maybe?

Ridge vent slot is cut way too big. Manufacturer says 3/4” each side. Don’t ever go bigger than 1”.

Buenas noches me gustaría saber como cobraria a un builder por una casa y si ustedes tienen un teléfono para comunicarse,les agradecería mucho

Hi Leo, have the same unit. Have you ever had an error code where the drum cannot spin, which stops the wash cycle early in the process?

i don't see how this is bad ? we need lots of these !

What is this called so I can buy it.

Walmart is not a campground

Is it possible to turn off the beep when when MPPT starts in the morning and stops in evening

Great information. How has your sink held up over time? I see a lot of people online complaining of the sink cracking, I’ve wondered if it was because it wasn’t well supported. Thank you 🙏

Thank you for very good for simple and useful explanation of how fireplace works

Massachusetts: oil boiler about 2 tanks a year for $1100. Wood stove for main heat source free.

Do I have a bad gas valve? I have a discontinued gas valve. The thermocouple reads 28-30mv, and the thermopile gets to 300-400 when heated. Both prove that the TP and TC work. Also checked continuity on the wall switch. The pilot light lights up but as soon as I let go after 2 min it turns off.

I have a newer unit as well, and the bottom of the duct is a rubber arm that you can removed with a little screwdriver. This did the trick as there was a ton of lint was all piled up in that duct assembly. Thank you for sharing!!

Thank You! Thank you! Thank you!

Just installed my mini split before Northeast winter, good information to know

Should a gas fireplace always have a small flame?

Is there any research paper related to this design???

is the motor a v10 or 8 cylender

Thanks for the video. Going to help my cousin tonight try to fix his. Nobody can figure it out.

are you in Toronto?

Purchased and used your exact setup except with 4.5" wheel - as of Sep '23, cost is $80. About 10 minutes to sand the adapter ring to size. Worked great for the small 6x6 area - start to finish in 45 minutes! Removing thinset from concrete with a chisel is a nightmare! This method produced almost zero dust with an impressive pile in the shop-vac afterwards. Just have to be careful when using - the diamond cup removes concrete just as fast as thinset. The grinder tool got pretty warm but it worked great!

Thank YOU!!! I almost went down the thermalpile/cloupler rabbit hole, but this is THE first thing to check. My fireplace was connected to a broken thermostat, which I haven't used and don't want to use anymore. Jumper wire test saved me LOTS of time and $$$.

why does that water look dirty?

thanks

sell this idea to the desert countries where there are tons of empty spaces and sun.